Pengontrol Batch EB11

Aplikasi yang umum meliputi pembotolan atau pengemasan, pengenceran konsentrat, dan penambahan bahan.

SKU EB406D0FM

Rp 5.913.000,00 - Rp 9.275.000,00

Rp 5.913.000,00

Rp 5.913.000,00 - Rp 9.275.000,00

Rp 5.913.000,00

FLOMEC EB11 “EasyBatch” adalah pengontrol batch dua tahap yang dirancang untuk menciptakan pengalaman pengeluaran yang efisien dan akurat.

Dapat dipasang langsung ke flow meter FLOMEC® atau dari jarak jauh dan kompatibel dengan berbagai jenis sinyal industri, EB11 memungkinkan pengguna untuk mengontrol volume fluida yang disalurkan ke proses mereka, sementara layar 7 digit besar dengan lampu latar memudahkan pembacaan status batch, baik dalam kondisi terang maupun gelap. Ditempatkan dalam wadah nilon yang diperkuat kaca dengan peringkat IP66/67-NEMA4X untuk meningkatkan ketahanan terhadap benturan dan korosi, terutama di lingkungan pencucian.

Features

2 keluaran NPN digital dengan peringkat arus hingga 300 mA untuk kontrol langsung katup solenoid atau untuk dihubungkan ke relai guna memungkinkan kontrol katup dan pompa besar.
Pengontrol 2 tombol yang mudah digunakan
Penutup NEMA4X IP66/67 tahan cuaca dan tahan lama
Layar 7 digit dengan lampu latar yang mudah dibaca
Pengaturan yang dipertahankan setelah kehilangan daya

Specifications

Jenis Instrumen: Pengontrol Batch
Tipe Pemasangan: Pemasangan Meter dan Batang, Dinding, Pipa atau Panel
Kisaran Suhu Operasional: -10°C - 60°C

Applications

Sauce Manufacturing: Ensure consistent flavor and texture in sauces, dressings, and condiments by accurately controlling the addition of liquids.
Microbreweries: Add exact strike water volumes every time for consistent
Wine and Spirits Production: Accurately measure and blend different liquids during the winemaking or distilling process.
Chemical Mixing: Accurately measure, blend and dilute chemicals for the production of cleaning agents, fertilizers, and other chemical products.
Cosmetic Production: Control the precise addition of liquids in the manufacturing of lotions, creams, and perfumes.
Water Treatment: Control the addition of chemicals for water purification and treatment processes.
Fuel Dispensing: Accurately measure and dispense fuels at fuel depots.
Agriculture: Control the dosage and application of liquid herbicides and pesticides in agricultural settings.
Aquaculture: Accurately dispense medications and nutrients in fish farms and aquaculture facilities.
Wastewater Treatment: Control the addition of chemicals in wastewater treatment processes including PAC dilution, reducing waste and increasing effectivity.
Building Industry: Dilution and addition of cement additives, and dedusting agents.

Quantity

FREQUENTLY ASKED QUESTIONS

Do I need single or dual stage batch control?

The EB40 is suitable for single stage operation. For dual stage operation use the EB11 or F130. Single stage operation is suitable for line sizes up to 40 mm or for larger slower acting valves. Hydraulic shock or water hammer may cause flow meter damage if a larger valve closes too fast.

Do I need power for the batch controller?

10-30Vdc power will be required as the EB40 has either a solid state or mechanical relay to control a valve.

Can I use the EB40 Batch Controller with remote start/stop/reset buttons?

Yes, the EB40 Batch Controller has remote relays so that an operator can start and stop a batch and rest it if required. It also has an interlock that will prevent the EB40 from measuring until a vessel is in place when used with a proximity sensor.

How do I choose that right solenoid for my system?

The choice of solenoid depends on a variety of specifications. The voltage, the pipe size, the pressure in the line, the chemical compatibility, the close rate and whether the valve is normally open or normally closed. The power rating is important to determine whether a mechanical relay is required between the EB11 and the solenoid, the maximum rating for a solenoid that can be wired directly to the output of the EB11 is 7.2 watts at 24v DC. See our See our EB11 Design Guide for more information on solenoid selection.

Can I pause the batch?

The batch volume can be paused and restarted at any time with the touch of a button.

Can I set multiple batch totals?

The EB40 Batch Controller has a ten batch volume storage, that can be easily selected. The volumes can be programmed with the CDS software from any Windows computer.

Can I use the EB40 to start and stop a pump?

The EB40 Batch Controller can be used to turn on and off a pump using the mechanical relay installed inside. The more accepted and accurate method is to use an automatic valve to shut off flow. This method has a faster response and gives more repeatable batch volumes.

Can the EB40 be used in areas containing flammable liquids such as unleaded petrol or alcohol?

No. The EB40 Batch Controller can only be used in areas where there is no risk of igniting an explosive gas or dust atmosphere e.g. petrol, solvents, alcohols. Consider the F130 Intrinsically Safe Batch Controller for such applications.